alternative energys

Posts Tagged ‘Grid’

We sought to invest in solar energy for some time now. It seems that for the moment the systems are out of our price range. Last month, our electric bill ran about $ 220 for 2362 kWh for the month. I was wandering if this is the excessive consumption of energy a bit, or average. I live in the region of eastern Tennessee, who tend to consume more energy anyway. Is what I can do for this use by far. We have all the lights in the CFL. Is it due to freezers and refrigerators. I know someone, for example, which has two upright freezers and a bill big enough. I read about the guidelines to help you make your own solar panels buy solar cells and to construct. Among the sites I’ve been in this mainly for electricity generation using 200-400 watts of emergency, recreational vehicles and other applications outside the network. Has anyone had experience with these guides, and can be used to say, a network 3kW tie? We opposed the gas heating power, but have not used. Recently, CA has been used only 30 minutes per day. All I can think of that would be the water heater tank is 50 gallons and tons more likely to use energy to maintain the water ready for use. In fact, I think the cut of a kick up what we need to take a shower or washing dishes or clothes. Hope this helps.

I guess the big question is what is the best place to get a low cost solution for the home windmill and information on how to configure the network connection to work on my house and back to the utility ? In addition, the best place to get solar panels on my roof because, again, at a low cost?

the number of solar panels in a grid connected system will see the difference in your energy bill?

Green living: Off the grid families pioneer sustainable energy lifestyles
Once on the fringe, about 750,000 off the grid American households pioneer green living by tapping sustainable energy from the wind, sun, and earth.

Read more on The Christian Science Monitor

I update all and I mean all electronic devices (include’n A / C) in energy efficiency. I got my electricity bills for the last 10 months. I know that my kWh per month and the day soooo how in the world How can I calculate the size of a solar system need? Thank you

Now, my panels connected to a network of bond investors who made 240 BC and is fed back into the electricity grid, but if the network never fails my system turns off to protect the line islands, I find a way to power, even during the day (without batteries), so I was wondering if there was a way to disable the main switch to the outside world and bring somehting to investors that the network is active It could produce energy. . . . I do not know that the information from a very small generator and allow the synchronization panels for that? I prefer some form of sine wave generator thinggy puseodo to deceive investors in the energy

I am studying the feasibility of installing a network of moorings in the wind generator. Has anyone here installed one of these systems in the electrical system of your home? I understand that you can install a new power meter to allow “net metering” or deny the figures for power created by the generator you can save money or reduce your energy bill monthly.

If you are outside the network, this type of batteries do you have?

Thank you to many helpful answers to my questions before I had the opportunity to find a company that sells this product. It will be remembered, was intrigued by this device: http://www. clariantechnologies. com / main / page_home. html. It is a motor driven vertical axis wind turbine which acts as an async generator induction that plugs directly into a wall of your house. N investors without batteries. Price about $ 500. With an electricity meter (a gift from our power company) that can work in reverse, it will allow me to significantly reduce my energy bill at a very low cost. To make the price even cheaper, and power increase, I have my own wind, and use my own asynchronous motors. So, all you need is the controlador.He found a company that sells this device: http://www. prairieturbines. com for $ 830. Connecting a turbine engine 5500-watt induction led directly to the network. No investor without batteries. Use a “Hall-device” to measure RPM, provides about a GPA for the engine to increase its rings, 50Amp Solid state zero Relay Cross, capacitors, switches 30 amps per case, a surface mounted switch , and a rise expressed in voltage control. That’s it! So my question is, nobody knows how to build this driver. This company has no intention of selling it, and $ 830 is too high for me. I’m sure I could build this with components under $ 400. If anyone in electrical engineering who can help, it will be a challenge, but it is good to know that someone else understands and is selling it.

I am investigating a 3KW system and I am interested in the net gain of living in the Midwest Zone 5 and I was wondering if you would be a return on investment, so I broke even this would be nice if I wouldnt use the foreign oil and help the environment. inital cost wouldnt be a concern, but is it worth?